The wood dust and branches in the forest are good materials that
can be recovered and used to make all kinds of decorative and
decorative materials. For the treatment of branches and leaves, we
need to use professional equipment, wood produced by 500 Ming
Machinery, which is one of them.
500 input sawdust hopper, feeder into the warehouse after
oscillation milling grinding, milling in the cabin after the
suction centrifugal force through the screen material device and
fan through pipes into the sieving device, the material after
sieving, fine material reaches the customer request directly from
the bag, and no coarse material from the request arrival after the
pipeline back to warehouse to mill grinding. In the whole grinding
process, a small amount of dust produced by the wood 500 pulverizer
is directly sucked into the dust collecting cloth through the fan,
and no dust can enter into the air.
1, Compared with other pulverizers, the capacity is 20-50 percent
increased with same power and the energy is saved.
2, Install the dust collection device, reduce the dust pollution
3, The labor is reduced with fan discharge.
4, The door of main machine can be opened which is convenient to
maintain and replace blades.
5, Adopt double cold(water and fan),the inner temperature of body
is decreased and the material pulverized is not distortional. t is
beneficial to pulverize the thermo-sensitive plastic, for example
1, With water spray cooling system. it is suitable for processing
of thermal sensitive material. With unique water spray cooling
system. When the temperature of main machine is higher than setting
temperature, water spray automatically until the temperature
Note: less of water spray into to machine will be dryed quickly
which will not affect material properties. It can be installed by
2, The raw material become power by vibration principle of
ultrasonic vortex wave pressure which is from the high speed
rotating of main shaft.
The material is conveyed to screening system by wind conveying. The
coarse materal is back to the milling chamber automatically, then
3, The blade adopt high quality steel which is treated by
heating.after heat treatment, with good abrasion resistance. It is
suitable for continuous running.
4, This size of machine is small with compact structure, fully
sealed, no dust overflow.
5, The material is transferred based on own wind pressure.
|Main motor||Rotating motor||24pieces|
High and low voltage protection
Dust collecting bag protection with 9 bags